SPECIFICATION

Packer Wheels
  • Semi-pneumatic rubber tires
  • Sealed double ball bearing in wheels
  • Several tire configurations
Packer Arm
  • Adjustable spring tension on packer arms ranges from 0 -130 lbs./arm at 2” of upward travel
  • 5” vertical movement if going over obstacles
Model 9910 Trailing Arm
  • Pressure adjustable coil springs
  • 10” vertical movement (approximately)
  • For and Aft adjustment arm has 18” of travel
  • Lateral mounting fully adjustable
Swivel Brackets
  • Greaseless bushings
  • 30 degrees travel from side to side
  • Can be locked solid if desired
Walking Axles
  • May be used with double wheel packer assembly while packing two different opener rows
  • Walking axle pivots on polyurathane bushings and a stainless 3/4” steel pin
  • Adjustable wheel spacing from 7 1/2” to 12” center to center on packers
  • 3” wide wheel is the only exception where the spacing can only go as close as 8”
Harrows
  • Double tines 8” on center 16” long
  • Optional 1 or 2 row in front of packers
  • optional 3 row heavy duty for summerfallowing
Color
  • Black
Weights
  • Main arm assembly Model 9910
    • 110 lbs.
  • Double wheel assemblies
    • 37 lbs. with 2” x 13” flat packers
    • 52 lbs. with 2” x 16” flat packers
    • 47 lbs. with 4” x 14” V-packers
    • 37 lbs. with 2” x 13” flat packers
    • 41 lbs. with 2” x 14” V-packers
  • Single wheel assemblies on average
    • 25 lbs.
  • Tubing 2.5x2.5x25
    • 7 lbs./ft
  • Two row harrows
    • 10 lbs./ft
  • Single row harrows
    • 4.5 lbs./ft
  • Bourgault adaptor with upright
    • 27.5 lbs.